Accuride 1432 Pivot Sliding Door Gear

Accuride 1432 Pivot Sliding Door Gear - dedicated for hideaway cabinet pocket door. Widely used in media cabinets and concealed storage.

• Vertical mounted only
• Made out of mild steel
• Runner thickness: 22.3mm
• Maximum door weight: 34kg
• For door widths: 255-660mm
• For door height: 915-2300mm
• For overlay or inset application
• The system runs on ball-bearing runners
• One set of runners is sufficient for one door only
• Synchronised runners for effortless and smooth operation
• Door thicknesses: 
  • Inset: 19-32mm
  • Part-overlay: 17-19mm

Please note that:

• The extension length indicates how much the door will hide inside the pocket
• Please make sure the cabinet is deep enough to accommodate the slider 'Length'
• Partial overlay doors: The pocket door runner should be the length of the cabinet depth or less, the calculation is
  • Cabinet depth – 3mm clearance = runner length (or shorter)
• Inset doors: You will need to allow space for the door inside the cabinet, the calculation is:
  • Cabinet depth – door thickness – 3mm clearance = runner length (or shorter)
• Hinges, hinge mounting plates and hinge carrier plates must be purchased separately
• Blum overlay hinges can only be used to achieve an inset application for 19-22mm door thickness only

The number of hinges and mounting plates required per door height:

• 915-1193mm (3 hinges)
• 1194-1498mm (4 hinges)
• 1499-1803mm (5 hinges)
• 1804-2300mm (6 hinges)

The number of hinge carrier plate sets required:

• 2 sets for 2 doors 915-1422mm tall
• 3 sets for 2 doors 1423-2000mm tall
• 4 sets for 2 doors 2001-2300mm tall

Important – Inset Door Hinge: If you add the Inset hinges from the related products section, the hinges would be supplied with overlay-style hinges. This is correct and is not an error. The hinges allow the door to sit inset within the cabinet/carcase while the door itself overlays the sliding mechanism inside the cabinet. Please refer to the product images and fitting instructions before ordering if you are unsure which hinge configuration you require.