U-19 Galvanised Curved Bottom Track For 200kg Systems

The U-19 Curved Bottom Track Is Used To Allow The Bottom Guidance Of Sliding Doors Around The Corner. It Is Installed On The Floor And Serves To Achieve A Change Of Perpendicular Direction For Sliding Doors Along The Rail. Perfect For Enabling Doors To Slide Round A Corner. For Commercial And Agricultural Applications.

• To work with 200kg curved 'round a corner' sliding door systems
• Manufactured with DD11 zink plated steel
• Suitable for outdoor and indoor use
• All compatible components are available in related products below
• Dimensions
• Radius curve: 650±10mm
• Length 1: 700±20mm
• Length 2: 700±20mm

Advisory

Please note, that the rail is supplied as 780mm x 780mm and the dimensions stated above are for the usable length. The rail has curved defects on both ends caused in the manufacturing process which need to be cut before installation.

If you need any assistance in building an order or what parts work with each other, please do not hesitate to contact us, either via our phone line, live chat, or our contact us page.