> Made from galvanised steel > Joining bracket for bottom channel 1109> Can be used for sliding and folding doors> To work with 1102, 1104 and 1104E guide> Dedicated for sportub 80kg, sportub folding 500(20kg)
> Dedicated for Sportub 150kg, 300kg-400kg, Sportub folding 500(38kg), Sportub folding 500(75kg) > To work with 1101, 1099, 1105 and 1105E > Joining bracket for bottom channel 1110> Made from galvanised steel> Can be used for sliding and folding doors
> Up to 60kg doors> Works with wooden doors> Soft-close add-on for our SAF Slim range of track systems> Soft-close can be retrofitted to existing Hercules systems> Two soft-close mechanisms are recommended for doors 830mm and wider
> Width: 19mm > Depth: 47mm> Height: 132mm> Material: aluminium> Colour/finish: anodised satin
> Width: 17mm > Depth: 36mm> Height: 41mm> Colour/finish: polished chrome> Material: brass
> Magnetic floor guide> The magnetic pin disappears into the floor when the door is open> Minimum door thickness: 30mm> A groove in the door is required> Suitable bottom channel can be purchased separately
> Width: 19mm > Depth: 37mm> Height: 50mm> Colour/finish: anodised satin> Material: aluminium
> Width: 76mm > Depth: 25mm> Height: 56mm> Material: zinc alloy> Colour/finish: polished chrome
> Finish: silver> Made out of aluminium> Suitable for sliding door system> Minimum door thickness: 30mm> Available in 2 lengths: 1250mm and 2500mm
> Satin anodised> Length: 100mm/152mm> Width: 32mm> Pop-out: 16mm> Made out of aluminium
> Grey finish> Set of end caps> Made out of plastic> Designed for the Hercules 60/120kg pelmet with end caps> To work for a specific pelmet (part number: 0883-001/0883-002)
> Made out of plastic> Length: 12mm> Diameter: 31mm> Version: 12mm projection> Self adhesive
> Suitable for horus sliding door gear> Sold in singles > Made in Europe> Allows door to stay in place> 2 recommended by the distributor per door
> Spacers for Hercules track> Pack of 5> Screws included> Height: 15mm> Spacers enable a pelmet to be fitted when the mounting track to the ceiling
> Suitable only for Atena tracks> A bracket every 60cm is needed> Allows to hang doors up to 45mm> Allows the track to be side-mounted> Pelmet can still be fitted with the use of the wall brackets
> Easy installation> Extra set of accessories to mount an additional door> Maximum individual door weight: 30kg> Minimum door thickness: 16mm> Maximum door thickness: 45mm