The Individual Blind Corner Optimiser is a smart solution for maximizing storage space in kitchen cabinets, especially those tricky corner areas. Whether you’re storing pots, pans, or small appliances, this optimiser ensures efficient use of your corner cabinet space. Say goodbye to wasted corners and hello to organized bliss! Suitable for 800,900 and 1000mm corner cabinets. Available in 2 finishes chrome/grey and anthracite.
- Total capacity: 60kg
- Basket capacity: 15kg
- Vertical frame width: 450mm
- No assembly to the door required
- Colour finish available: anthracite
- Easy installation, effortless operation
- A stylish handle allows easy extraction
- Can be used with or without a corner post*
- Optimum usage of space with ease of access
- Universal (suitable for left and right-hand units)
- All trays pull out from the cabinet giving easy access
- Wipe clean the anti-slip base of trays made of MF-MDF
- Minimum internal depth - 465mm front to back (cabinets with hinge post: 440mm between hinge post and back panel)
Specifications:
- Height of the basket: 75mm
- Maximum depth of centre post: 60mm
- Distance from the base of the carcass to the bottom of the lower basket: 115mm
- Distance from the base of the carcass to the bottom of the upper basket: 370mm
- Clearance between the basket and front of the cabinet next to it when the unit retracted: 100mm
- Distance from the top of the vertical frame to the top of the top basket is 75mm, but to the bottom of the top basket is 150mm
- Distance between the far side of the basket to the side of the cabinet when extracted
- 800mm = 255mm
- 900mm = 265mm
- 1000mm = 265mm
800mm dimensions:
- Length: 660mm
- Depth: 455mm
- Height: 523mm
- Tray dimensions(x4):
- Width: 280mm
- Length: 375mm
900mm dimensions:
- Length: 685mm
- Depth: 455mm
- Height: 523mm
Tray dimensions(x4):
- Width: 300mm
- Length: 375mm
1000mm dimensions:
- Length: 735mm
- Depth: 455mm
- Height: 523mm
Tray dimensions:
- 2x:
- Width: 350mm
- Length: 375mm
- 2x:
- Width: 300mm
- Length: 375mm
Blind Corner Optimisers
Magic Corners
Measured at the narrowest point of the cabinet between centre post and back panel.
System have to operate without any obstructions.
If depth of the cabinet is insufficient there are amendments to the cabinet that might be done:
- moving back panel further back
- removing centre post (corner post) and mounting doors on 190 degree hinges
- mounting door to the basket if possible
- Solid Base
No posts found
