Accuride 1319 Is A Simple And Effective Pivot Sliding Door Gear Also Called Cabinet Pocket Door Gear. It Helps To Free Up Space Taken By The Traditional Hinged Door By Retracting Back Into The Cabinet Carcass Or Pocket.
- For vertical or horizontal use
- Maximum allowed door weight: 5.5kg (up to 25kg if used with 1316 synchronisation kit)
- Maximum door height: 700mm (door height up to 2300mm with 1316 synchronisation kit)
- Maximum recommended door width: 600mm
- Recommended door thickness: 16-20mm
- Please make sure the cabinet is deep enough to accommodate the runner installation length.
- Inset doors: You will need to allow space for the door inside the cabinet, the calculation is:
Cabinet depth – door thickness – 3mm clearance = runner length (or shorter)
- Inset doors: You will need to allow space for the door inside the cabinet, the calculation is:
- A hinge carrier strip is not supplied and must be made from wood or MDF
- The door will hide inside the cabinet as much as indicated by 'extended length'. Please make sure the cabinet is deep enough to accommodate the slider 'length'.
- Suitable hinge and plate
- 0920-001 - Blum Clip Hinge Mounting Plate 175H7100
- 4618-001 - Blum Clip Top Full Overlay Cabinet Hinge 75T1550
Set consists of:
- 4x zink plated mounting brackets
- 2x zink-plated runners
Hinges required per door height:
- Door below 915mm = 2/3 hinges depending on width
- 915-1193mm = 3 hinges
- 1194-1498mm = 4 hinges
- 1499-1803mm = 5 hinges
- 1803-2300mm = 6 hinges
Hinges and plates need to be ordered separately - available in related products below
Length:
350mm
Extension Length:
244mm
No posts found